1.Shower room, bathtub, basin, toilet, kitchen equipment, etc.
2.Various other sealing and anti-mold uses
NO. |
Item |
Standard regulations |
Test result |
Individual evaluation |
||
1 |
Appearance |
It should be a fine, uniform paste without lumps Gel crusts and precipitates that are not easy to disperse quickly |
Fine and uniform black paste, no agglomerated gel, crust and precipitates that are not easy to disperse quickly |
Qualified |
||
2 |
Sagging degree, mm |
Vertical placement |
≤3
|
0 |
Qualified |
|
Horizontally |
Not deformed |
Not deformed |
||||
3 |
Density/g/cm3 |
Specified value ±0.1 |
0.97 |
Measured value |
||
4 |
Hardness/shore A |
15-50 |
28 |
Qualified |
||
5 |
Surface drying time/h |
≤2 |
0.1-0.3 |
Qualified |
||
6 |
Tensile adhesion |
Standard condition |
Tensile bonding strength/MPA |
≥0.20 |
0.38 |
Qualified |
Bonding failure area/% |
≤15 |
0 |
Qualified |
|||
After soaking |
Tensile bonding strength/MPA |
≥0.20 |
0.25 |
Qualified |
||
Bonding failure area/% |
≤15 |
0 |
Qualified |
|||
7 |
Extrude ability/(ml/min) |
≥110 |
420 |
Qualified |